carbon steel tube
"
Пробки теплообменного аппарата стали углерода ASTM A210 безшовные средств для перегревателей
ASTM A210 Seamless medium carbon steel boiler and superheater tubes Applications: for Boilers,Superheaters,Steam linepipes of boilers Size range: O.D.:12.7-127mm W.T.:1-15mm L: according to customer requirement Steel Grade and Chemical Compositions: Grade C Mn P S Si A-1 ≤0.27 ≤0.93 ≤0.035 ≤0.035 ≥0.10 C ≤0.35 0.29-1.06 ≤0.035 ≤0.035 ≥0.10 Mechanical properties: Grade Yield Point Mpa(ksi) Tensile Strength Mpa(ksi) Elongation A-1 ≥255(37) ≥415(60) ≥30% C ≥275(40) ≥485(70) ≥30%
Трубки стали углерода ЭН 10217-4 195ТР1 П235ТР1 сваренные П265ТР1 для целей давления
EN10217-4 Welded Steel Tubes for Pressure Purposes EN10217-4 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties Material: Fully killed steel, Fine grain steel with a ferritic grain size. Steel Names: In accordance with EN10027-1 and CR10260 Manufacture: HFW High frequency welded SAW Submerged arc welded - longiditudinal seam - SAWH - helical seam - SAWL Welding
сталь углерода 40Мн2 20Кр 40Кр 15КрМо/трубка легированной стали горячекатаная стальная
Hot rolled for structural purpose Seamless steel tubes as per GB/T 8162 Torich produced by Hot rolled with carbon and alloy steel,Like 10,20,20Mn,25Mn,20Cr,40Cr 15CrMo 45Mn2 etc. as per standard GB/T 8162 applying in Mechanical contructure and general purpose of structure. Detail spec: Size range: OD 76-700mm WT 6-50mm L:3-12.5m Material:Carbon steel:10,20,45,25Mn,Q295,Q345,40Mn2,20Cr,40Cr,15CrMo etc. Alloy steel:40Mn2,20Cr,40Cr,15CrMo etc If not specificate from customer ,We
Углерод - трубки безшовной стали стали марганца/трубы для корабля ГБ/Т 5312
Carbon and Carbon-Manganese Steel Seamless Steel Tubes and Pipes for Ship GB/T 5312 Spec: Material:320/360/410/460/490 Size Range:OD:4-1200mm WT:0.3-200mm General Length:3-12m Tolerance: According to the following tables or customers’ request. Production Method Size(mm) Tolerance Hot Rolling(Extrusion) OD ≤159 ±1.0%(min.±0.50mm) >159 ±1.25% WT ≤20 +15%(min.+0.45mm) -10%(min. -0.30mm) >20 ±10% D≥351 ±15% Cold Drawn OD ≤30 ±0.20mm 30~50 ±0.30mm >50 ±0.8% WT 1.5~3 +12.5% -10% >3
Трубка стали углерода Астм А334 Гр6 безшовная, труба Сс безшовная для низкого Температуре
Products Description: Seamless Carbon and Alloy Steel Tube ASTM A334 Gr6 for Low-Temperature Service Material: Element Compision, % Gr1 Gr3 Gr6 Gr7 Gr8 Gr9 Gr11 C, max 0.30 0.19 0.30 0.19 0.13 0.20 0.10 Mn 0.40-1.06 0.31-0.64 0.29-1.06 0.90 max 0.90 max 0.40-1.06 0.60 max P, max 0.025 0.025 0.025 0.025 0.025 0.025 0.025 S, max 0.025 0.025 0.025 0.025 0.025 0.025 0.025 Si - 0.18-0.37 0.10 min 0.13-0.32 0.13-0.32 - 0.35 max Ni - 3.18-3.82 - 2.03-2.57 8.40-9.60 1.60-2.24 35.0-37
Конденсатор трубок теплообменного аппарата стали углерода Эрв пускает Астм по трубам А214 Са214
ASTM A214 SA214 ERW Carbon Steel Heat-Exchanger Tubes Condenser Pipes Size range: O.D.:6-76.mm W.T.:0.9-19.0mm L: according to customer requirement Manufacture: Tubes are made by electric-resistance welding. Steel Grade and Chemical Compositions: C 0.18 Mn 0.27 to 0.63 P ≤0.035 S ≤0.035 Hardness Requirements: The tubes shall have a hardness number not exceeding 72HRB. Surface Condition: The finished tubes are free of scale., slight amount of oxidation is not considered as
Трубка Астм А556 Од 6 до 1000мм холоднотянутой стали подогревателя Федватер безшовная
ASTM A556 Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes Size: Outer Diameter: 6-1000 mm,Wall Thickness: 1- 80 mm,Length :1-12m or as your request Application:Manufacture of Feedwater Heater Material:10#.20#.16Mn.A106(B,C).ST35-ST52 Manufacture :Tubes shall be made by the seamlessprocess and shall be cold drawn. Heat Treatment: 1)Cold-drawn tubes shall be heat treated after the finalcold-draw pass at a temperature of 1 200F [640C] or higher toensure ductility satis
Холодный законченный/горячий нанесенный стальной прут Астм А29 1010 углерода 1020 5.5мм до 500мм
ASTM A29 1010 1020 Cold Finished and Hot Wrought Carbon Steel Bars Hot- Wrought Steel Bars Steel bars produced by hotforming ingots, blooms, billets, or other semifinished forms toyield straight lengths (or coils,. depending upon size. section,.and mill equipment) in sections that are uniform throughouttheir length. and in the following sections and sizes: 1) Rounds, 732 to 10.0 in. [5.5 to 250 mm]. inclusive.31.1.2 Squares, 7/32 to 6.0 in. [6 to 160 mm]. inclusive. 2)Round
Низкоуглеродистая поверхность большого диаметра трубки безшовной стали смазанная для штуцеров
Large Diameter Cold Rolled Seamless Low Carbon Steel Pipe for Fittings Application:Applicable to -45 °C grade ~-100 °C level cryogenic pressure vessel pipe and low temperature heat exchanger pipe seamless steel Size:L--4-12m OD--30-351mm WT--3-25mm Manufacture method:Steel should be smelted with oxygen converter or electric furnace and added outside the furnace Delivery Condition:Normal delivery Processing methods:Hot rolled (expanding) steel pipe--WH cold drawing (rolling)
