cold drawn steel pipe
"
Равнина/скошенные трубки легированной стали никеля конца UNS N06601
UNS N06601 Nickel Alloy Steel Tubes Inconel 601 nickel-chromium-iron alloy is a general-purpose engineering material for applications that require resistance to heat and corrosion. The outstanding characteristic of Inconel 601 is its resistance to high-temperature oxidation. The alloy also has good resistance to aqueous corrosion, has high mechanical strength, and is readily formed, machined, and welded. The limiting chemical composition of Inconel 601 is listed in Table 1.
трубопровод легированной стали никеля Inconel 600 длины 2-12m
Inconel 600 Nickel Alloy Steel Tubing Inconel Alloy 600 tubing is made from a non-magnetic, nickel-chromium alloy known for its good oxidation resistance at high temperatures. In fact, Inconel® Alloy 600 (UNS N06600) was designed for use from cryogenic to elevated temperatures up to and surpassing 2000 degrees F. Inconel® Alloy 600 tubing possesses great mechanical properties, a good combination of high strength with good workability, and is weldable without difficulty.
Трубопровод стали углерода амортизатора удара 10mm SAE 1020 безшовный
SAE 1020 carbon steel for automobile outer tube Cabon steel grade SAE 1020 is a low hardness and low tensile strength alloy. The Brinell hardness of the SAE 1020 Steel Tube ranges between 119 – 235, whereas its tensile strength is between 410 MPa to 790 MPa. Though it lacks some of the characteristics of a conventional carbon steel grade, the SAE 1020 Steel Tube exhibits other important characteristics such as high strength, high machinability, high ductility as well as good
ASTM A519 1010 1020 1026 трубок нержавеющей стали точности безшовных для гидравлической системы
Torich International Limited is a professional manufacturer and exporter of steel pipes materials. Our main products are precision seamless steel tube,carbon seamless steel tube,The material we usually use for producing precision seamless steel tube is10#,20#,1010,1020,1026,ST37,ST44,E235,E215,E355. ASTM A519 is a standard specification for seamless carbon and alloy steel mechanical tubing used in a variety of applications. This specification covers several grades of carbon
Средние трубки углерода ASME SA210 Gr.A1 Gr.C безшовные стальные для боилера и перегревателя
Medium Carbon ASME SA210 Gr.A1 Gr.C Seamless Steel Tubes for Boiler and Superheater Product Deacription Application For boiler tubes, boiler flues and superheater tubes O.D. 12.7 - 127 mm Min W.T. 0.9 - 12.7 mm (Tolerance: +20%) Length As per client requested Chemical Composition Grade C Mn P S Si A-1 ≤0.27 ≤0.93 ≤0.035 ≤0.035 ≥0.10 C ≤0.35 0.29-1.06 ≤0.035 ≤0.035 ≥0.10 Mechanical properties Grade Yield Point Mpa(ksi) Tensile Strength Mpa(ksi) Elongation A-1 ≥255(37) ≥415(60)
Трубки 33.4MM JIS G3444 структурные стальные для механического
JIS G3444 Structural Steel Tubes for Mechanical Usage JIS G3444 indicated welded or consistent carbon steel tubes for general auxiliary purposes,civil designing, engineering, steel towers, frameworks, swaggers, heaps for concealment of avalanche and different structures Grade:STK290,STK400,STK490,STK500,STK540 Outer diameter: 33.4-660mm Wall thickness:2.1-22mm Length:0.8-18m suppliers Method: Hot Rolled. Surface Treatment: Coating, Painting, Galvanized, etc. Chemical
Безшовная трубка JIS G3460 низкая Tempreture стальная
JIS G3460 low tempreture steel tube -JIS G3460 STPL380, STPL450, STPL690 Chemical Composition: Steel Grade Chemical Composition % C Si Mn P S Ni STPL 380 0.25 max. 0.35 max. 1.35 max. 0.035 max. 0.035 max. 3.20 ~ 3.80 STPL 450 0.18 max. 0.10~0.35 0.30~0.60 0.030 max. 0.030 max. 3.20 ~ 3.80 STPL 690 0.13 max. 0.10~0.35 0.90 max. 0.030 max. 0.030 max. 8.50 ~ 9.50 -JIS G3460 STPL380, STPL450, STPL690 Mechanical Property: Steel Grade Tensile strength Yield point or proof stress
ТРУБКИ БОИЛЕРА И ТЕПЛООБМЕННОГО АППАРАТА ЛЕГИРОВАННОЙ СТАЛИ JIS G3462
JIS G3462 ALLOY STEEL BOILER AND HEAT EXCHANGER TUBES JIS Specification alloy steel Tubes are used for high temperature service applications. Seamless Alloy Steel Tubes according to JIS G3462 Grade STBA 12 are reheated and furnished in full annlealed,isothermal annealed or normalised quenched and tempered condition. JIS G3462 Grade STBA 12 Alloy Steel Seamless Tubes have a typical chemistry with additions of 0.45-0.65 Molybdenum.Bearing minimum tensile strength of 380 Mpa JIS
Труба из ферритной мартенситной нержавеющей стали ASTM A268
ASTM A268 20 Meters Max Ferritic and Martensitic Seamless Stainless Steel Tube Name Ferritic and Martensitic Seamless Stainless Steel Tube Standard ASTM A268, ASME SA268 Outer Diameter 6-219mm Thickness 0.5-12.7mm Length 6m or as customers' request Tolerance a) Outer Diameter: +/- 0.2mm b) Thickness: +/- 0.02mm c) Length: +/- 5mm Surface 180G, 240G, 320G Satin / Hairline 400G, 600G Mirror finish Test Squash test, Extended test, Water pressure test, Crystal rot test, Heat
