heat exchanger tubes
"
304 316 сваренная трубка аустенитной нержавеющей стали для боилеров/теплообменного аппарата
ASTM A249 304 316 Welded Austenitic Stainless Steel Tube for Boilers / Heat Exchanger Size: OD: 1/8 in (3.2mm) to 5 in (127mm) WT: 0.015 to 0.320 in (0.4 to 8.1mm) Grade: TP304H, TP309H, TP310H, TP316H, TP312H, TP347H and TP348H. TP304, TP309S, TP310S, TP310Cb, TP316, TP321, TP347, TP348 For high-temperature service such as for superheaters and reheaters Application: Boiler, Superheater, Heat Exchanger, Condensor Tubes Austenitic stainless steel, temperature service
Трубка ребра продольной катушки теплообменного аппарата алюминиевая медная прессовала врезанный тип
Products Description TORICH Extruded Embedded Type Longitudinal Spiral/Square Heat Exchanger Coil Aluminium Copper Fin Tube for Radiators Evaporator Material C10200, C11000 Etc Size Fin Thickness: 0.1-2mm; Tube OD: 8-55mm; Length: max 12m Fin Pitch Customize Surface Copper Coated End protector Plain End / Beveled End Application For Heat Exchanger Test Tension Test, Flaring Test, Flange Test, Reverse Test, Hardness Test, Hydrostatic or Nondestructive Electric Test Quick
Труба боилера ГБ13296 теплообменного аппарата сваренная нержавеющей сталью
GB13296 Seamless Stainless Steel Heat Exchanger Boiler Pipe Standard: GB13296 Seamless Stainless Steel Tubes For Boiler And Heat Exchanger Usage: This standard is applicable to Austenite and Ferritic seamless stainless steel tubes for boiler and heat exchanger. Production process: Seamless tube can be produced by Hot Treatment, Cold Drawing or Cold Rolling. Note: Special steel grade is also available, according to customer request. Permissible deviation of outside diameter
Трубка безшовной стали теплообменного аппарата АСТМ А213 Т5 Т9 боилера
Torich ASTM A213 T5 T9 Seamless Boiler Heat exchanger Stainless Tube Brief introduction: Name ASTM A213 Seamless Boiler Heat exchanger Stainless Tube Standard ASTM A213 Production method Cold drawn,Seamless Grade T5,T9,T11,18Cr2Mo Section shape Round OD 3.2-127mm WT 0.4-12.7mm Length Max12000mm Application Boiler,heat transfer,heat exchanger Surface condition The ferritic steel cold drawn steel pipe shall be free from peeling and suitable for inspection. A small amount of
Трубка нержавеющей стали ГБ/Т 13296 безшовная для боилера/теплообменного аппарата
Seamless Stainless Steel Tubes for Boiler and Heat Exchanger GB/T 13296 Spec: Material:302 Size Range:OD:6-159mm WT:1-14mm General Length:3-12m Tolerance: According to the following tables or customers’ request. Permissible deviation of outside diameter and wall thickness Classification Nominal size Allowable deviation W-H OD ≤140 ±1.25%D ＞140 ±1%D S ≤3 -40%S ＞3~4 -35%S ＞4~5 -33%S ＞5 -28%S W-C OD 6~30 +0.15 -0.20 ＞30~50 ±0.30 ＞50 ±0.75%D S D≤38 +20%S D＞38 -22%S Steel grade
ASTM A213 замариновало холоднопрокатные обожженные боилер/теплообменные аппараты трубки
ASTM A213 Boiler / Heat Exchangers Annealed Pickled Stainless Seamless Steel Tube Product Name Boiler steel tube Material 304 316 T11 T22 Type Seamelss Standard ASTM A213 Grade 304, 304L, 316L, 321, 347, 904L Size 5-420 mm Length 800mm - 11800 mm Used bolier, heat exchanger Tolerance for seamless stainless boiler tube: Production Method Size(mm) Tolerance Hot Rolling(Extrusion) OD ≤140 ±1.25% ＞140 ±1.0% WT ≤10 ±12.5% ＞10 ±15% Cold Drawn(Cold Rolled) OD 8~30 ±0.20mm ＞30~50 ±0
Трубка нержавеющей стали 2 дюймов на теплообменные аппараты/конденсаторы 304 316
2 inch stainless steel tubing for Heat Exchangers / Condensers 304 316 Grade: UNS N02200, UNS N02201 Production: Cold worked, Hot worked Size range: O.D.:6-127mm W.T.:1-30mm L: according to Customer requirement TABLE 2 Chemical Requirements Chemical Compostion Composition, % Element Nicel (UNS N02200) Low-Carbon Nickel (UNS N02201) Ni,A min 99.00 99.00 Cu 0.25 0.25 Fe 0.40 0.40 Mn, max 0.35 0.35 C,max 0.15 0.02 Si,max 0.35 0.35 S,max 0.01 0.01 Delivery Conditions: Symbols
ASTM A213 холодное - трубка вычерченного сплава безшовная стальная для теплообменного аппарата перегревателя боилера
ASTM A213 Cold Drawn Seamless Alloy Steel Boiler Superheater and Heat Exchanger Tubes ASTM A213 is a specification for seamless alloy steel tubes, intended for use in boilers, superheaters, and heat exchangers. These tubes are cold drawn and manufactured using high-quality alloy steel, making them suitable for high-temperature applications where strength and corrosion resistance are important factors. Material The material used in ASTM A213 tubes is a type of alloy steel that
Алюминиевая медь прессовала врезанный особенный теплообменный аппарат стальной трубы для испарителя радиаторов
Products Description:Fin Tube Aluminium Copper Extruded Embedded Type Heat Exchanger for Radiators Evaporator BaseTube material:Stainless steel(SA213 304) copper muffDimension:OD:16-140mm WT:2-10mm Length:1-25m Fin material:SA213-TP304H,Copper and so on Fin type:KL,L,LL,H ,spiral slot,low,Stud pipes-Visual, typeseamless copper stainless steel fin tube Dimension:Thickness of fin :0.5-4.0mm Height of fin:5-30mm Fin pitch :3.5-40mm Make the craft:steel tube polishing-tooth
