heat exchanger tubes
"
Ферритик/аустенитовая двухшпиндельная трубка Астм А789 нержавеющей стали для теплообменных аппаратов
TORICH ASTM A789 Seamless Ferritic/Austenitic Duplex Stainless Steel Tube Product Description: Size: GB/T size is under,other standard of size is for ready choice O.D.: 6-219.1mm W.T.: 0.5-12.7mm Length: 20m max Stainless Steel Pipe Surface finish: Bright Annealed,Polished Delivery Condition: 1. Annealed & Pickled 2.Bright and Annealed 3.Annealed and Pickled+Polishing 4.Bright and Annealed+Polishing CHEMICAL COMPOSITION: UNS Chemical , % C Mn P S Si Ni Cr Mo N S31803 0.030MAX
Теплообменный аппарат безшовный и сваренная труба Ферритик/нержавеющая сталь Мартенстик
ASTM A268 Seamless and Welded Ferritic and Martenstic Stainless Steel Tubing for General Service Brand : TORICH Standard: ASTM A268 O.D: 12.7-203mm Normal W.T : 5.1mm Application : For boiler and heat-exchange Tolerance of Size Group Size,O.D in(mm) Permissible Variations in O.D in (mm) 1 up to1/2(12.7) ,excl +/- 0.005(0.13) 1/2 to 1,1/2(12.7 to38.1),excl +/- 0.005(0.13) 2 1,1/2 to 3,1/2 (38.1 to 88.9) excl +/- 0.01 (0.25) 3 3,1/2 to 5,1/2(88.9 to 139.7) excl +/-0.015(0.38) 4
Трубопровод Ферритик/Мартенстик точности нержавеющей стали для теплообменного аппарата
ASTM A268 Seamless and Welded Ferritic and Martenstic Stainless Steel Tubing for General Service Brand : TORICH Standard: ASTM A268 O.D: 12.7-203mm Normal W.T : 5.1mm Application : For boiler and heat-exchange Tolerance of Size Group Size,O.D in(mm) Permissible Variations in O.D in (mm) 1 up to1/2(12.7) ,excl +/- 0.005(0.13) 1/2 to 1,1/2(12.7 to38.1),excl +/- 0.005(0.13) 2 1,1/2 to 3,1/2 (38.1 to 88.9) excl +/- 0.01 (0.25) 3 3,1/2 to 5,1/2(88.9 to 139.7) excl +/-0.015(0.38) 4
Теплообменные аппараты OD 420mm ASTM A178 ERW сварили стальную трубку
ASTM A178 ERW Welded Carbon Steel Boiler and Super Heater Tubes Applications: for Boilers,Superheaters, Heat-Exchangers, Condensers, Boiler flues, superheater flues and e ends Production: Electric Resistance Welding Size range: O.D.:6-127mm W.T.:0.9-9.1mm L: according to customer requirement STEEL GRADE AND CHEMICAL COMPOSITIONS Element Grade A Grade C Grade D C 0.06 - 0.18 ≤ 0.35 ≤ 0.27 Mn 0.27 - 0.63 ≤0.80 1.00 - 1.50 P ≤ 0.035 ≤ 0.035 ≤ 0.030 S ≤ 0.035 ≤ 0.035 ≤ 0.015
Трубка точности Sa213 T11 стальная холодная - вычерченный безшовный боилер теплообменного аппарата
SA213 T11 Cold Drawn Seamless Heat Exchanger Boiler Tube Production Method: Carbon Steel Seamless Heat Exchanger Boiler Tubeis a kind of boiler pipe, which belongs to the category of seamless steel pipe. The manufacturing method is the same as that of seamless pipe, but there are strict requirements for the steel Grade used in the manufacture of steel pipe. pressure cooker Furnace seamless tubes are often in high temperature and high pressure conditions when used. The tubes
Рыбчатая трубка с повышенной эффективностью теплопередачи, антипленкой и равномерной температурой стенки для применения при высоких температурах
8 Inner Ribbed Tube SA210C / A1 SA213 T2 28.6X6.2 38.1X7.5 63.5X7.5 66.7X8 Inner-Ribbed Seamless Steel Tube for High-Efficiency Heat Transfer Inner-ribbed seamless steel tubes (also known as internally threaded tubes) are precision cold-drawn or cold-rolled tubes engineered to enhance heat transfer efficiency in high-temperature environments. By forming continuous spiral ribs on the inner wall, these tubes significantly improve fluid turbulence, reduce steam film formation,
Теплообменные аппараты ДЖИС Х4631 свернули Титанюм трубу сплава 6.35кс0.3
JIS H4631 Titanium Alloy Rolled 6.35x0.3 Seamless Tube Titanium Heat Exchanger Pipes Product Overview: Product name: JIS H4631 Titanium Alloy Rolled 6.35x0.3 Seamless Tube Titanium Heat Exchanger Pipes Standard: GB/T 3625, GB/T 3624, ASTM B338, ASTM B861, AMS 4942, JIS H4630, JIS H4631, JIS H4635, DIN17861, DIN17866, GOST24890, GOST21945, GOST22897 Technical: Rolled, Extruded Size Range: OD: 3-159 mm WT: 0.2-6 mm Or according to customers' actual application and production.
Трубка углерода ASTM A214 стальная сваренная для теплообменного аппарата и конденсатора
ASTM A214 is a specification that covers minimum-wall-thickness, electric-resistance-welded, carbon steel tubes to be used for heat exchangers, condensers, and similar heat-transfer apparatus. These tubes are commonly used in boilers, superheaters, and air coolers. Material and Specification The material used in ASTM A214 is carbon steel, and the tubes are electric-resistance-welded. The specification covers a range of sizes and thicknesses, as shown in the table below.
Холодный - вычерченная безшовная труба нержавеющей стали ASTM A270 для теплообменных аппаратов боилера
Stainless Steel and Pipe Cold Drawn Seamless Pipe ASTM A270 For Boiler Heat Exchangers Material The material used for cold drawn seamless pipes, specifically for boiler heat exchangers, conforms to the ASTM A270 standard. The ASTM A270 specification covers seamless and welded austenitic and ferritic/austenitic stainless steel sanitary tubing for general service. Specification The specification for the cold drawn seamless pipes, as per ASTM A270, includes the following key
